- Home
- ยป
- Our Products
- »
- Medical Waste Incinerator
Medical Waste Incinerator
Medical Waste incinerator
Usage/Application | Medical Waste incinerator |
Type Of Incinerator | Hospital Waste Incinerator |
Power Source | Diesel |
Waste Type | clinical Waste, Infectious Waste, Dressing, Bio-Waste, Medicine. |
Brand | Scientico |
Capacity | 40 kg/batch |
Burning Ability | 100 Kg/time |
Average Burn Out Time | 4 Hrs |
Material | Stainless Steel |
Medical Waste incinerator SCI-INC-30/1
Scientico is from the primary chamber under the hearth through an integral refractory brick system. This ensures maximum gas turbulence/ mixing is achieved thus aiding clean combusted gases. All gases then reside inside the after burner chamber for a minimum of 2 seconds at temperatures of 850-1150°C ensuring complete high temperature termination/oxidation of the gas combustion products.
Scientico Incinerators are CE certified
General Construction
- Pre-fabricated 5MM robust mild steel casing, seam welded & suitably stiffened/ braced where necessary
- High Quality Heat Resistant Paint is used.
- Refractory lining in the primary & secondary chambers totalling thickness of 215mm,rated at 1260°C, provide increased fuel efficiency.
- Removable roof and back plate for ease of maintenance.
- Air Blower for rapid cooling systems, aiding cleaner burns and faster cool down times.
Primary Chamber
Fully insulated internal refractory lining,constructed from high grade refractory brick ensuring a self-supporting interlocked arrangement. One manually operated, access lid Two waste ignition burner, temperature controlled on-o , complete with internal air fans A pre-cast block impact zone, that protects the refractory lining when loading.
Secondary Chamber
- Fully insulated internal refractory lining,constructed from high grade low thermal mass insulation.One secondary chamber burnout burner, temperature controlled on-o , complete with internal air fans.
- Integrated combustion burner air fans with automatically controlled distribution to their designated area.
- One temperature sensor mounting point at the top of the chamber ensuring the chamber reaches the necessary 850°C minimum.
Technical Spec.SCI-INC-30/1
- Burning Rate (kgs/Hour)50-60 kgs/Hr.
- Feed Capacity (kgs)100-120 kgs
- Equipment Weight2500 kgs
- Primary Chamber (Liters)360
- Secondary Chamber (Liters)200
- External Dimensions (cm) 190*200*195
- Internal Dimensions (cm)100x60x60
- Oil Tank(Liters)200
- Door Opening (cm)48 x 60
- Chimney (M)5.0
- Secondary Chamber : YES
- Combustion Fuel Oil/Gas
- Residency Time2.0 Sec.
- Temperature Monitoring :YES
- Constant Run Fan :YES
- Operation Temperature : 950-1050
- SCRUBBER :Type Ventury Scrubber
- MOC SS316
- Temperature at the outlet >80°C
- Scrubbing Media Caustic Soda
- RE-CIRCULATION PUMP FOR VENTURI SCRUBBER
- Type Centrifugal
- MOC M.S
- Piping GI
- DROPLET SEPARATOR & RE-CIRCULATION TANK (INTEGRAL)
- Type Cyclonic
- Application To remove moisture
- MOC M.S FRP Lined/ epoxy Paint
- I. D. FAN
- Type Centrifugal
- MOC M.S
- Drive Direct
- COMBUSTION FAN
- Type Centrifugal
- Modulation Provided
- MOC M.S
- Drive Direct
Smokeless Hospital Medical Waste Incinerator
Usage/Application | Hospital & clinical Waste, Infectious Waste, Dressing, Bio-Waste, Medicine. |
Type Of Incinerator | Hospital Waste Incinerator |
Power Source | Diesel |
Waste Type | clinical Waste, Infectious Waste, Dressing, Bio-Waste, Medicine. |
Brand | Scientico |
Capacity | 40 kg/batch |
Burning Ability | 100 Kg/time |
Smokeless cheap hospital medical waste incinerator
Scientico is a leading smokeless cheap hospital medical waste incinerator manufacturer in India. We are local manufacturer and one of the largest exporter in India. Scientico manufacture OF smokeless cheap hospital medical waste incinerator , Animal Incineration, Pet cremation and other Solid waste.
Presently, we supply different series for local customer requirements and design updated incinerator with our leading.
technology. The updated design feature of our range of incinerators make them one of the most cost effective in the world.
Application Scope:
- Hospital & clinical Waste, Infectious Waste, Dressing, Bio-Waste, Medicine.
- Slaughter House & Pet Hospital &Farm: Dead Animal, Bio-Waste.
- Community & Sea Port & Station: Municipal Waste, etc.
- Large Animal/Human Cremation
- All models with Dual combustion chamber.
- Environmental Friendly, No Visible smoke/flumes, No smell
- High temperature, long life Time of incinerator with 5mm MS sheet Fabrications.
- [ IS 8 Refractory Bricks With Insulation Brick IS 2042- 2006 ]
- No or minimum installation on site.
- High burn rate, from 15kgs to 1000kgs per hour, up to 6ton per day.
- Treatment for A/B/C/D/E grade Garbage waste.
- New Design for pet animal cremation business.
- One year warranty on incinerator and parts in stock.[exwrk]
- Heavy Duty Incinerator waste feed door, safe and negative pressure operation in combustion chamber.
- Supply large scale incinerators, burning rate up to 500kgs per hour and 6 ton per day.
- User Guide for customers
- CE Certified
Bio Medical Waste Incinerator
Usage/Application | Hospital& clinical Waste,Infectious Waste,Dressing,Bio-Waste,Medicine |
Type Of Incinerator | Hospital Waste Incinerator |
Power Source | Diesel |
Waste Type | waste meterial |
Brand | Scientico |
Capacity | 40 kg/batch |
Burning Ability | 100 Kg/time |
Material | Stainless Steel |
Bio Medical Waste Incinerator
Scientico is a leading Bio Medical Waste Incinerator manufacturer in India. We are local manufacturer and one of the largest exporter in India. Scientico manufacture Bio Medical waste incinerator,Gas Fired incinerators , Solid waste incinerator, Garbage waste incinerator Animal Incineration, Pet cremation and other Solid waste.
Presently, we supply different series for local customer requirements and design updated incinerator with our leading technology. The updated design feature of our range of incinerators make them one of the most cost effective in the world.
Application Scope:
- Hospital& clinical Waste, Infectious Waste, Dressing, Bio-Waste, Medicine
- Slaughter House &Pet Hospital &Farm: Dead Animal, Bio-Waste.
- Community & Sea Port & Station: Municipal Waste, etc.
- Large Animal/Human Cremation.
Main Characteristics:
- All models with Dual combustion chamber.
- Environmental Friendly, No Visible smoke/flumes, No smell
- High temperature, long lifeTIme of incinerator with 5mm MS sheet Fabrications
- [ IS 8 Refractory Bricks With Insulation Brick IS 2042- 2006 ]
- No or minimum installation on site.
- High burn rate, from 15 kgs to 1000 kgs per hour, up to 6 ton per day.
- Treatment for A/B/C/D/E grade Garbage waste.
- New Design for pet animal cremation business.
- One year warranty on incinerator and parts in stock.[exwrk]
- Heavy Duty Incinerator waste feed door, safe and negative pressure operation in combustion chamber.
- Supply large scale incinerators, burning rate up to 500kgs per hour and 6 ton per day.
- User Guide for customers
- CE Certified
Portable Medical Waste Incinerator
Usage/Application | Hospital& clinical Waste,Infectious Waste,Dressing,Bio-Waste,Medicine. |
Type Of Incinerator | Hospital Waste Incinerator |
Power Source | Diesel |
Waste Type | waste meterial |
Brand | Scientico |
Capacity | 40 kg/batch |
Burning Ability | 100 Kg/time |
The portable medical waste Incinerator
Scientico is a leading The portable medical waste Incinerator manufacturer in India. We are local manufacturer and one of the largest exporter in India. Scientico manufacture The portable medical waste Incinerator , Animal Incineration, Pet cremation and other Solid waste.
Presently, we supply different series for local customer requirements and design updated incinerator with our leading technology. The updated design feature of our range of incinerators make them one of the most cost effective in the world.
Application Scope:
Hospital& clinical Waste, Infectious Waste, Dressing, Bio-Waste, Medicine..
Slaughter House &Pet Hospital &Farm: Dead Animal, Bio-Waste.
Community & Sea Port & Station: Municipal Waste, etc.
Large Animal/Human Cremation
Main Characteristics :
All models with Dual combustion chamber.
Environmental Friendly, No Visible smoke/flumes, No smell
High temperature, long life TIme of incinerator with 5mm MS sheet Fabrications
[ IS 8 Refractory Bricks With Insulation Brick IS 2042- 2006 ]
No or minimum installation on site.
High burn rate, from 15kgs to 1000kgs per hour, up to 6ton per day.
Treatment for A/B/C/D/E grade Garbage waste.
New Design for pet animal cremation business.
One year warranty on incinerator and parts in stock.[exwrk]
Heavy Duty Incinerator waste feed door, safe and negative pressure operation in combustion chamber.
Supply large scale incinerators, burning rate up to 500kgs per hour and 6 ton per day.
User Guide for customers
CE Certified
Medical waste Disposable Incinerator
Usage/Application | Medical Waste incinerator |
Type Of Incinerator | Hospital Waste Incinerator |
Power Source | Diesel |
Waste Type | waste meterial |
Capacity | 40 kg/batch |
Burning Ability | 100 Kg/time |
Average Burn Out Time | 3 Hrs |
Medical Waste incinerator SCI-INC-30/1
Scientico is from the primary chamber under the hearth through an integral refractory brick system. This ensures maximum gas turbulence/ mixing is achieved thus aiding clean combusted gases. All gases then reside inside the after burner chamber for a minimum of 2 seconds at temperatures of 850-1150°C ensuring complete high temperature termination/oxidation of the gas combustion products.
Scientico Incinerators are CE certified
General Construction
- Pre-fabricated 5MM robust mild steel casing, seam welded & suitably stiffened/ braced where necessary
- High Quality Heat Resistant Paint is used.
- Refractory lining in the primary & secondary chambers totalling thickness of 215mm,rated at 1260°C, provide increased fuel efficiency.
- Removable roof and back plate for ease of maintenance.
- Air Blower for rapid cooling systems, aiding cleaner burns and faster cool down times.
Primary Chamber
Fully insulated internal refractory lining,constructed from high grade refractory brick ensuring a self-supporting interlocked arrangement. One manually operated, access lid Two waste ignition burner, temperature controlled on-o , complete with internal air fans A pre-cast block impact zone, that protects the refractory lining when loading.
Secondary Chamber
- Fully insulated internal refractory lining,constructed from high grade low thermal mass insulation.One secondary chamber burnout burner, temperature controlled on-o , complete with internal air fans.
- Integrated combustion burner air fans with automatically controlled distribution to their designated area.
- One temperature sensor mounting point at the top of the chamber ensuring the chamber reaches the necessary 850°C minimum.
Technical Spec.SCI-INC-30/1
- Burning Rate (kgs/Hour)50-60 kgs/Hr.
- Feed Capacity (kgs)100-120 kgs
- Equipment Weight2500 kgs
- Primary Chamber (Liters)360
- Secondary Chamber (Liters)200
- External Dimensions (cm) 190*200*195
- Internal Dimensions (cm)100x60x60
- Oil Tank(Liters)200
- Door Opening (cm)48 x 60
- Chimney (M)5.0
- Secondary Chamber : YES
- Combustion Fuel Oil/Gas
- Residency Time2.0 Sec.
- Temperature Monitoring :YES
- Constant Run Fan :YES
- Operation Temperature : 950-1050
- SCRUBBER :Type Ventury Scrubber
- MOC SS316
- Temperature at the outlet >80°C
- Scrubbing Media Caustic Soda
- RE-CIRCULATION PUMP FOR VENTURI SCRUBBER
- Type Centrifugal
- MOC M.S
- Piping GI
- DROPLET SEPARATOR & RE-CIRCULATION TANK (INTEGRAL)
- Type Cyclonic
- Application To remove moisture
- MOC M.S FRP Lined/ epoxy Paint
- I. D. FAN
- Type Centrifugal
- MOC M.S
- Drive Direct
- COMBUSTION FAN
- Type Centrifugal
- Modulation Provided
- MOC M.S
- Drive Direct
Medical Waste Incinerator
Minimum Order Quantity: 1 Piece
Usage/Application | MEDICAL WASTE INCINERATOR |
Type Of Incinerator | Hospital Waste Incinerator |
Power Source | Electrical |
Waste Type | MEDICAL WASTE |
Brand | SCIENTICO |
Capacity | 10 kg/batch |
Burning Ability | 50 KG/DAY |
Average Burn Out Time | 3 Hrs |
Material | Galvanized Metal |
Automation Grade | AUTOMATIC |
I Deal In | New Only |
Features | SMOKELESS |
Energy Consumption | 8 kw |
Product Dimension | 1.5*2*5 mtr |
Weight | 800 kg |
Furnace Chamber Temperature | UPTO 1250 DEGREE C |
Air Blower | YES |
Burning Efficiency | 99% |
Chamber | DUAL |
Country of Origin | Made in India |
The most compact incinerator in our range, the SCI-INC-15(2SEC) has a 50kg load capacity and a 0.17m³ chambervolume.
Made from lightweight yet durable materials making ita highly versatile machine that can be trailer mountedand used as mobile incineration unit.
Additional Information:
- Production Capacity: 10
- Delivery Time: 30
- Packaging Details: WOODEN
Medical Waste Incinerator SCI-INC-30/1
Minimum Order Quantity: 1 Piece
Usage/Application | MEDICAL WASTE INCINERATOR |
Type Of Incinerator | Hospital Waste Incinerator |
Power Source | DIESEL/GAS |
Waste Type | MEDICAL WASTE |
Brand | SCIENTICO |
Capacity | 100 kg/batch |
Burning Ability | 100 Kg/time |
Average Burn Out Time | 3 Hrs |
Material | Galvanized Metal |
Automation Grade | AUTOMATIC |
I Deal In | New Only |
Features | SMOKELESS |
Energy Consumption | >1KW |
Product Dimension | 1.5*2*5 mtr |
Weight | 3200KG |
Furnace Chamber Temperature | UPTO 1250 DEGREE C |
Air Blower | YES |
Burning Efficiency | 99% |
Chamber | DUAL |
Chimney Height | 5 METER FROM GROUND LEVEL |
Control Panel | AUTO |
Voltage | 440 |
Minimum Order Quantity | 1 |
Model Name/Number | SCI-INC-30/1 |
Country of Origin | Made in India |
The SCI-INC-30/1 is a very productive compact medical waste incineratior.
The machine is extensively used around the world and is ideal for Hospitals, Primary Medical Services, Research Centres, Pharmaceutical Manufacturers, Private Surgery Practices, Cosmetic Surgery Practices, Care Homes, Tattoo Surgeries and other Clinical Waste facilities.
The SCI-INC-30/1 machine is equipped with a 0.36m³ chamber.
The SCI-INC-30/1 is equipped with afterburn chamber for clean smokless burn with gas resistance time of more than 2 seconds
As such whilst the SCI-INC-30/1 machine can handle a wide variety of waste, it is especially competent when dealing with Category 2, 3 and 4 types or those less than <3000Kcal or red bag waste.
This is an area where conventional medical incinerators struggle with the complete combustion cycle.
The SCI-INC-30/1 is a highly effective and very fuel-efficient machine ideally suited to servicing the needs of a hospital with approximately 10-200 occupied beds per day.
Additional Information:
- Production Capacity: 10
- Delivery Time: 30
- Packaging Details: WOODEN
Professional Medical Waste Incinerator
Type Of Incinerator | Hospital Waste Incinerator |
Power Source | Diesel |
Waste Type | clinical Waste, Infectious Waste, Dressing, Bio-Waste, Medicine. |
Brand | Scientico |
Usage/Application | Hospital & clinical Waste, Infectious Waste, Dressing, Bio-Waste, Medicine. |
Material | Stainless Steel |
Country of Origin | Made in India |
Scientico is a leading Professional medical waste incinerator manufacturer in India. We are local manufacturer and one of the largest exporter in India. Scientico manufacture OF Professional medical waste incinerator, Animal Incineration, Pet cremation and other Solid waste.
Presently, we supply different series for local customer requirements and design updated incinerator with our leading technology. The updated design feature of our range of incinerators make them one of the most cost effective in the world.
Application Scope:
- Hospital & clinical Waste, Infectious Waste, Dressing, Bio-Waste, Medicine.
- Slaughter House &Pet Hospital &Farm: Dead Animal, Bio-Waste.
- Community & Sea Port & Station: Municipal Waste, etc.
- Large Animal/Human Cremation.
- All models with Dual combustion chamber.
- Environmental Friendly, No Visible smoke/flumes, No smell.
- High temperature, long lifeTIme of incinerator with 5mm MS sheet Fabrications
- [ IS 8 Refractory Bricks With Insulation Brick IS 2042- 2006 ]
- No or minimum installation on site.
- High burn rate, from 15kgs to 1000kgs per hour, up to 6ton per day.
- Treatment for A/B/C/D/E grade Garbage waste.
- New Design for pet animal cremation business.
- One year warranty on incinerator and parts in stock.[exwrk]
- Heavy Duty Incinerator waste feed door, safe and negative pressure operation in combustion chamber.
- Supply large scale incinerators, burning rate up to 500kgs per hour and 6 ton per day.
- User Guide for customers
- CE Certified
Bio Medical Waste Incinerator
Usage/Application | Hospital& clinical Waste, Infectious Waste, Dressing, Bio-Waste, Medicine. |
Type Of Incinerator | Hospital Waste Incinerator |
Power Source | Diesel |
Waste Type | clinical Waste, Infectious Waste, Dressing, Bio-Waste, Medicine. |
Brand | Scientico |
Capacity | 40 kg/batch |
Burning Ability | 100 Kg/time |
Material | Stainless Steel |
Medical Incinerator
Scientico is a leading Medical waste incinerator manufacturer in India. We are local manufacturer and one of the largest exporter in India.
Scientico manufacture Incinerators for hotel waste , Garbage waste incinerator, Animal Incineration, Pet cremation and other Solid waste.
Presently, we supply different series for local customer requirements and design updated incinerator with our leading technology. The updated design feature of our range of incinerators make them one of the most cost effective in the world.
Application Scope:
- Hospital& clinical Waste, Infectious Waste, Dressing, Bio-Waste, Medicine.
- Slaughter House &Pet Hospital &Farm: Dead Animal, Bio-Waste.
- Community & Sea Port & Station: Municipal Waste, etc.
- Large Animal/Human Cremation
Main Characteristics :
- All models with Dual combustion chamber.
- Environmental Friendly, No Visible smoke/flumes, No smell
- High temperature, long life Time of incinerator with 5mm MS sheet Fabrications
[ IS 8 Refractory Bricks With Insulation Brick IS 2042- 2006 ]
- No or minimum installation on site.
- High burn rate, from 15kgs to 1000 kgs per hour, up to 6 ton per day.
- Treatment for A/B/C/D/E grade Garbage waste.
- New Design for pet animal cremation business.
- One year warranty on incinerator and parts in stock.[exwrk]
- Heavy Duty Incinerator waste feed door, safe and negative pressure operation in combustion chamber.
- Supply large scale incinerators, burning rate up to 500kgs per hour and 6 ton per day.
- User Guide for customers
- CE Certified
Hospital Waste Incinerator
Usage/Application | Hospital& clinical Waste, Infectious Waste, Dressing, Bio-Waste, Medicine. |
Type Of Incinerator | Hospital Waste Incinerator |
Power Source | Diesel |
Waste Type | waste meterial |
Brand | Scientico |
I Deal In | New Only |
Hospital Waste Incinerator
Scientico is a leading hospital waste incinerator manufacturer in India. We are local manufacturer and one of the largest exporter in India.
Scientico manufacture Incinerators for hotel waste , Garbage waste incinerator, Animal Incineration, Pet cremation and other Solid waste.
Presently, we supply different series for local customer requirements and design updated incinerator with our leading technology. The updated design feature of our range of incinerators make them one of the most cost effective in the world.
Application Scope:
- Hospital& clinical Waste, Infectious Waste, Dressing, Bio-Waste, Medicine.
- Slaughter House &Pet Hospital &Farm: Dead Animal, Bio-Waste.
- Community & Sea Port & Station: Municipal Waste, etc.
- Large Animal/Human Cremation
Main Characteristics :
- All models with Dual combustion chamber.
- Environmental Friendly, No Visible smoke/flumes, No smell
- High temperature, long lifeTIme of incinerator with 5mm MS sheet Fabrications
- [ IS 8 Refractory Bricks With Insulation Brick IS 2042- 2006 ]
- No or minimum installation on site.
- High burn rate, from 15kgs to 1000 kgs per hour, up to 6 ton per day.
- Treatment for A/B/C/D/E grade Garbage waste.
- New Design for pet animal cremation business.
- One year warranty on incinerator and parts in stock.[exwrk]
- Heavy Duty Incinerator waste feed door, safe and negative pressure operation in combustion chamber.
- Supply large scale incinerators, burning rate up to 500kgs per hour and 6 ton per day.
- User Guide for customers
- CE Certified
Laboratory Waste Incinerators
Usage/Application | Hospital & clinical Waste,Infectious Waste,Dressing,Bio-Waste,Medicine. |
Type Of Incinerator | Hospital Waste Incinerator |
Power Source | Diesel |
Waste Type | clinical Waste, Infectious Waste, Dressing, Bio-Waste, Medicine. |
Brand | Scientico |
Capacity | 40 kg/batch |
Burning Ability | 100 Kg/time |
Scientico is a leading Laboratory Incinerator manufacturer in India. We are local manufacturer and one of the largest exporter in India. Scientico manufacture Incinerators for Laboratory Incinerator, Animal Incineration, Pet cremation and other Solid waste.
Presently, we supply different series for local customer requirements and design updated incinerator with our leading technology. The updated design feature of our range of incinerators make them one of the most cost effective in the world.
Application Scope:
- Hospital& clinical Waste, Infectious Waste, Dressing, Bio-Waste, Medicine.
- Slaughter House &Pet Hospital &Farm: Dead Animal, Bio-Waste.
- Community & Sea Port & Station: Municipal Waste, etc.
- Large Animal/Human Cremation
- All models with Dual combustion chamber.
- Environmental Friendly, No Visible smoke/flumes, No smell
- High temperature, long life Time of incinerator with 5mm MS sheet Fabrications
- [ IS 8 Refractory Bricks With Insulation Brick IS 2042- 2006 ]
- No or minimum installation on site.
- High burn rate, from 15kgs to 1000kgs per hour, up to 6ton per day.
- Treatment for A/B/C/D/E grade Garbage waste.
- New Design for pet animal cremation business.
- One year warranty on incinerator and parts in stock.[exwrk]
- Heavy Duty Incinerator waste feed door, safe and negative pressure operation in combustion chamber.
- Supply large scale incinerators, burning rate up to 500kgs per hour and 6 ton per day.
- User Guide for customers
- CE Certified
Incinerator For Clinical Waste
Minimum Order Quantity | 1 Piece |
Usage/Application | Hospital & clinical Waste,Infectious Waste,Dressing,Bio-Waste,Medicine. |
Type Of Incinerator | Hospital Waste Incinerator |
Waste Type | clinical Waste, Infectious Waste, Dressing, Bio-Waste, Medicine. |
Brand | Scientico |
Capacity | 40 kg/batch |
Burning Ability | 100 Kg/time |
Average Burn Out Time | 4 Hrs |
Material | Galvanized Metal |
Scientico is a leading Incinerator for clinical Waste manufacturer in India. We are local manufacturer and one of the largest exporter in India. Scientico manufacture OF Incinerator for clinical Waste, Animal Incineration, Pet cremation and other Solid waste.
Presently, we supply different series for local customer requirements and design updated incinerator with our leading technology. The updated design feature of our range of incinerators make them one of the most cost effective in the world.
Application Scope:
- Hospital & clinical Waste, Infectious Waste, Dressing, Bio-Waste, Medicine.
- Slaughter House & Pet Hospital &Farm: Dead Animal, Bio-Waste.
- Community & Sea Port & Station: Municipal Waste, etc.
- Large Animal/Human Cremation
- All models with Dual combustion chamber.
- Environmental Friendly, No Visible smoke/flumes, No smell.
- High temperature, long life Time of incinerator with 5mm MS sheet Fabrications
- [ IS 8 Refractory Bricks With Insulation Brick IS 2042- 2006 ]
- No or minimum installation on site.
- High burn rate, from 15kgs to 1000kgs per hour, up to 6ton per day.
- Treatment for A/B/C/D/E grade Garbage waste.
- New Design for pet animal cremation business.
- One year warranty on incinerator and parts in stock.[exwrk]
- Heavy Duty Incinerator waste feed door, safe and negative pressure operation in combustion chamber.
- Supply large scale incinerators, burning rate up to 500kgs per hour and 6 ton per day.
- User Guide for customers
- CE Certified
Hospital Incinerator
Usage/Application | Hospital& clinical Waste,Infectious Waste,Dressing,Bio-Waste,Medicine. |
Type Of Incinerator | Hospital Waste Incinerator |
Power Source | Diesel |
Waste Type | clinical Waste, Infectious Waste, Dressing, Bio-Waste, Medicine. |
Brand | Scientico |
Capacity | 40 kg/batch |
Burning Ability | 100 Kg/time |
Material | Galvanized Metal |
Hospital Incinerator
Scientico is a leading hospital waste incinerator manufacturer in India. We are local manufacturer and one of the largest exporter in India.
Scientico manufacture Incinerators for hotel waste , Garbage waste incinerator, Animal Incineration, Pet cremation and other Solid waste.
Presently, we supply different series for local customer requirements and design updated incinerator with our leading technology. The updated design feature of our range of incinerators make them one of the most cost effective in the world.
Application Scope:
- Hospital& clinical Waste, Infectious Waste, Dressing, Bio-Waste, Medicine.
- Slaughter House &Pet Hospital &Farm: Dead Animal, Bio-Waste.
- Community & Sea Port & Station: Municipal Waste, etc.
- Large Animal/Human Cremation.
- All models with Dual combustion chamber.
- Environmental Friendly, No Visible smoke/flumes, No smell
- High temperature, long life Time of incinerator with 5mm MS sheet Fabrications
- No or minimum installation on site.
- High burn rate, from 15kgs to 1000 kgs per hour, up to 6 ton per day.
- Treatment for A/B/C/D/E grade Garbage waste.
- New Design for pet animal cremation business.
- One year warranty on incinerator and parts in stock.[exwrk]
- Heavy Duty Incinerator waste feed door, safe and negative pressure operation in combustion chamber.
- Supply large scale incinerators, burning rate up to 500kgs per hour and 6 ton per day.
- User Guide for customers
- CE Certified
Medical Waste Incinerator SCI-INC-50
Minimum Order Quantity: 1 Piece
Usage/Application | MEDICAL WASTE INCINERATOR |
Type Of Incinerator | Hospital Waste Incinerator |
Power Source | DIESEL/GAS |
Waste Type | MEDICAL WASTE |
Brand | SCIENTICO |
Capacity | 50 KG/BATCH |
Burning Ability | 200 Kg/time |
Average Burn Out Time | 3 Hrs |
Material | Galvanized Metal |
Automation Grade | AUTOMATIC |
I Deal In | New Only |
Features | SMOKELESS |
Energy Consumption | >1KW |
Product Dimension | 2*2*5 MTR |
Weight | 3200KG |
Furnace Chamber Temperature | UPTO 1250 DEGREE C |
Air Blower | YES |
Burning Efficiency | 99% |
Chamber | DUAL |
Chimney Height | 5 METER FROM GROUND LEVEL |
Control Panel | AUTO |
Voltage | 440 |
Minimum Order Quantity | 1 |
Model Name/Number | SCI-INC-50 |
Heating | DIESEL OR GAS |
Country of Origin | Made in India |
The scientico SCI-INC-50 medical waste incinerator machine is equipped with a 0.91m³ loading chamber.
Ideal for Hospitals, Primary Medical Services, Research Centres, Pharmaceutical Manufacturers, Private Surgery Practices, Cosmetic Surgery Practices, Care Homes and other Clinical Waste facilities.
SCIENTICO SCI-INC-50 MEDICAL WASTE INCINERATOR is equipped with afterburn chamber with gas residency time of more than 2 seconds providing complete smokeless operation
SCI-INC-50 MEDICAL WASTE INCINERATOR machine can handle a wide variety of waste, it is specifically competent when dealing with Category 2, 3 and 4 types or those less than <3000Kcal and red bag waste.
This is an area where conventional medical incinerators struggle with the complete combustion cycle.
The SCI-INC-50 MEDICAL WASTE INCINERATOR is a highly effective and very fuel-efficient machine burn rates to suit any application ideally suited to servicing the needs of a hospital with approximately 500-800 occupied beds per day
Additional Information:
- Item Code: SCI-INC-50
- Production Capacity: 5
- Delivery Time: 30
- Packaging Details: WOODEN
Medical Waste Incinerator Sci-Inc-100
Minimum Order Quantity: 1 Piece
Usage/Application | MEDICAL WASTE INCINERATOR |
Type Of Incinerator | Hospital Waste Incinerator |
Power Source | DIESEL/GAS |
Waste Type | MEDICAL WASTE |
Brand | SCIENTICO |
Capacity | 200 KG/BATCH |
Burning Ability | 200 Kg/time |
Average Burn Out Time | 3 Hrs |
Material | Galvanized Metal |
Automation Grade | AUTOMATIC |
I Deal In | New Only |
Features | SMOKELESS |
Energy Consumption | >1KW |
Product Dimension | 3*2*5 MTR |
Weight | 5500KG |
Furnace Chamber Temperature | UPTO 1250 DEGREE C |
Air Blower | YES |
Burning Efficiency | 99% |
Chamber | DUAL |
Chimney Height | 5 METER FROM GROUND LEVEL |
Control Panel | AUTO |
Voltage | 440 |
Minimum Order Quantity | 1 |
Model Name/Number | SCI-INC-100 |
Heating | DIESEL OR GAS |
Country of Origin | Made in India |
The SCI-INC-100 MEDICAL WASTE INCINERATOR is a large medical pathological waste DUAL CHAMBERED incineration machine.
Equipped with a total of three burners, this highly powerful machine is ideal for large quantities of waste with a loading chamber size of 1.17m³.
Scientico SCI-INC-100 MEDICAL WASTE INCINERATOR is a system that effectively incinerates waste from above and below simultaneously this allows the machine to cleanly and effectively dispose of a wide variety of waste, it is specifically competent when dealing with Category 2, 3 and 4 types or those less than <3000Kcal and red bag waste.
This is an area where conventional medical incinerators struggle with the complete combustion cycle due to the low energy value of the waste.
This low energy waste typically includes red bag waste, blood, human organs, tissues, swabs.
This SCI-INC-100 MEDICAL WASTE INCINERATOR 500kg incinerator ideally suited to servicing the needs of a hospital with approximately 625-1000 occupied beds per day.
Additional Information:
- Item Code: SCI-INC-100
- Production Capacity: 30
- Delivery Time: 30
- Packaging Details: WOODEN
Red Bag Waste Incinerator
Minimum Order Quantity | 1 Piece |
Usage/Application | Red Bag Waste Incinerator |
Type Of Incinerator | Hospital Waste Incinerator |
Power Source | Diesel |
Waste Type | waste meterial |
Brand | Scientico |
Capacity | 40 kg/batch |
Burning Ability | 100 Kg/time |
I Deal In | New Only |
Red Bag waste incinerator
Scientico is a leading Red Bag waste incinerator manufacturer in India. We are local manufacturer and one of the largest exporter in India. Scientico manufacture red Bag waste incinerator, Gas Fired incinerators , Solid waste incinerator, Red Bag waste incinerator , Animal Incineration, Pet cremation and other Solid waste
Presently, we supply different series for local customer requirements and design updated incinerator with our leading technology. The updated design feature of our range of incinerators make them one of the most cost effective in the world.
Application Scope:
- Hospital& clinical Waste, Infectious Waste, Dressing, Bio-Waste, Medicine.
- Slaughter House &Pet Hospital &Farm: Dead Animal, Bio-Waste.
- Community & Sea Port & Station: Municipal Waste, etc.
- Large Animal/Human Cremation
Main Characteristics:
- All models with Dual combustion chamber.
- Environmental Friendly, No Visible smoke/flumes, No smell
- High temperature, long lifeTIme of incinerator with 5mm MS sheet Fabrications
- [ IS 8 Refractory Bricks With Insulation Brick IS 2042- 2006 ]
- No or minimum installation on site.
- High burn rate, from 15 kgs to 1000 kgs per hour, up to 6 ton per day.
- Treatment for A/B/C/D/E grade Garbage waste.
- New Design for pet animal cremation business.
- One year warranty on incinerator and parts in stock.[exwrk]
- Heavy Duty Incinerator waste feed door, safe and negative pressure operation in combustion chamber.
- Supply large scale incinerators, burning rate up to 500kgs per hour and 6 ton per day.
- User Guide for customers
- CE Certified